Wireless Keyboard - Toshiba Qosmio DX730 Series User Manual

2.
3.
Connecting the keyboard/mouse to the computer
In order to normally use the wireless keyboard and mouse, make a
connection between the computer and keyboard/mouse firstly, by the
following steps:
1.
2.
3.
User's Manual
Connect the AC adaptor's DC output plug to the DC IN 19V jack on
the back of the computer.
Figure 1-3 Connecting the DC output plug to the computer
1. DC output plug
Plug the power cord into a live wall outlet - the Power indicator on the
front of the computer should glow.
Be careful not to place your fingers on the hinge between the
computer's back and the stand as this could cause personal injury
such as the finger pinch.
For models with subwoofer, it is recommended not allow the cables to
be passed from the hole on the stand as this could bring interference.
Open the wireless receiver cover on your computer.
Insert the wireless receiver into the wireless receiver connector.
Figure 1-4 Connecting the dongle to the computer
1
1. Wireless receiver cover
2. Wireless receiver connector
Close the wireless receiver cover.
TOSHIBA DX730/DX735/Qosmio DX730 Series
2
1
2. DC IN 19V jack
2
3
3. Wireless receiver (dongle)
1-5