Supervisor Password; Starting The Computer By Password - Toshiba Qosmio DX730 Series User Manual

Supervisor Password

If you set a Supervisor Password, some functions will be restricted when a
user logs on with the User Password. To set a Supervisor Password:
Start -> All Programs -> TOSHIBA -> Support & Recovery -> TOSHIBA
Assist -> SECURE -> Supervisor password
This utility lets you do the following:

Starting the computer by password

If you have already registered a password, there is one way to start the
computer:
The password is necessary only if the computer was shut down in boot
mode, not in Hibernation or Sleep mode.
To enter a password manually, follow the steps as detailed below:
1.
At this point, the hotkeys FN + F1 to F4 and FN + F6 to F8 do not work.
They will function after you enter the password.
2.
3.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
User's Manual
Not Registered
Click to delete a registered password. Before you can delete a
password, you must first enter the current password correctly.
Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click Apply or OK. When the computer is started, this text
will be displayed together with the prompt asking you to enter a
password.
Register or delete the Supervisor Password.
Specify restrictions for general users.
Enter the password manually.
Turn on the power as described in Chapter 1,
following message will appear in the screen:
Enter Password [ ]
Enter the Password.
Press ENTER.
TOSHIBA DX730/DX735/Qosmio DX730 Series
Getting Started. The
4-15