Toshiba Qosmio DX730 Series User Manual page 114

1
C
M
1
* The optical disc drive will be used to start the computer when there is a
bootable disk contained in the drive.
To change the boot drive, follow the steps below.
1.
2.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in HW Setup. In addition, if
you press a key other than one of those listed, or if the selected device is
not installed, the system will continue to boot according to the current and
available settings in HW Setup.
Boot Speed
This feature allows you to select system boot-up speed.
Fast
Normal
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
User's Manual
Hold down F12 and boot the computer. when the TOSHIBA Leading
Innovation >>> logo screen appears, release the F12 key.
Use the up and down cursor keys to select the boot device you want
and press ENTER.
The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature.
TOSHIBA DX730/DX735/Qosmio DX730 Series
Selects the built-in hard disk drive.
Selects the CD-ROM*
Selects the USB memory drive.
Reduces system boot-up time. System can boot
only from the built-in HDD and only internal LCD
and keyboard are supported during the boot
process.
System boots up at normal speed. (Default)
1
.
4-18