Toshiba Qosmio DX730 Series User Manual page 37

Memory module slot
TV Tuner jack
HDMI out port
HDMI input port
Universal Serial Bus
(USB 2.0) ports
Wireless receiver
(dongle) slot
LAN jack
User's Manual
Do not connect any cable other than a LAN cable to the LAN jack. It
could cause damage or malfunction.
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
TOSHIBA DX730/DX735/Qosmio DX730 Series
The memory module slot allows for the
installation, replacement and removal of
additional memory module.
2 GB, 4 GB or 8 GB memory modules can be
installed in the computer's two memory slots for a
maximum of 16 GB system memory. The actual
amount of useable system memory will be less
than the installed memory modules.
Refer to the Additional memory module
Chapter 3, Operating Basics.
Connect the coaxial cable to this port to watch
TV programs on your computer or record them.
The dimensions and shape of the TV Tuner jack
vary for different regions.
Some models are equipped with a TV tuner.
HDMI out port can connect with Type A
connector HDMI cable.
By connecting the HDMI cable to this port, the
video and audio signals from digital devices such
as notebooks or camcorders can be transmitted
and displayed on this computer.
Four Universal Serial Bus ports, which comply to
the USB 2.0 standard, are provided on the back
side of the computer.
This slot lets you install a wireless receiver. Refer
to Chapter 3, Operating
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX) or
Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). Refer to chapter 3,
Operating Basics, for details.
section in
Basics, for details.
2-8