Table of Contents
Advertisement
Usergroup
Extensions
6.3 Device Configuration
A device could be an IP phone, gateway, analog telephone adapter, or even another IP PBX, etc. It has
one or more extensions to be registered to the IP PBX.
6.3.1 IP Phone
The DEVICE PHONE MANAGEMENT page lets the administrator to create IP Phone devices. Before
connecting a device to the IP PBX, you need to configure the same account information into the device
through the configuration interface enabled by the device. Select Device -> IP Phone to add, edit,
delete and search devices. Go to Service -> IP PBX Service, and click Reload to activate changes.
6.3.1.1 Add a Device
1.
Enter a device name in the Device ID box, and a URL for fast connection to device configuration
page or description for the device in the Device Administration URL box.
2.
Click Add to see the newly added device in the Device ID.
6.3.1.2 Edit a Device
Once create the device, you can modify its information through the following steps.
1.
Modify the Device Administration URL and click Link as a shortcut to the device administration
URL.
2.
Click Edit to see the Enable Automatic Client Configuration (ACC) page. Table 6-3 is a reference
for detailed ACC settings which is used for auto-configuring IP phones. One can specify the MAC
address and audio preferences of the phone. Note that for phones using HTTP for
auto-configuring, DHCP setting needs a new option 151 with a value of http://<IP PBX LAN
IP>/tftpboot/ in the Code,Value box in Service -> DHCP Service. If the phone uses TFTP for
auto-configuration, the option is 150 by default.
3.
Click Enable to see Enable shows in the Auto Client Conf column. Click Edit and then Disable
to disable the function.
e-mail as an attachment.
Select the usergroup this user belongs to.
If there is not any appropriate usergroup to select,
come back later to revise this selection if no
appropriate usergroup could be chosen for now.
Show the extensions associated with this user.
45
Advertisement
Table of Contents
