Table of Contents
Advertisement
Preparation before beginning administration on IP
PBX System
Physical Interfaces
AC Power
1
Telephony
2
interface ports
USB ports
3
WAN
4
LAN
5
Administration Interface
The IP PBX provides GUI (Web based, Graphical User Interface) for machine
management and administration.
Web configuration access
To start IP PBX web configuration, you must have one of these web browsers
installed on computer for management
• Microsoft Internet Explorer 6.0 or higher with Java support
Default LAN IP address of IP PBX is 192.168.1.1. You may now open your web
browser, and insert https://192.168.1.1 in the address bar of your web browser
to logon IP PBX web configuration page.
IPX-2000 will prompt for logon username/password, please enter: admin / admin
to continue machine administration.
AC 100-240V, 50-60 Hz
4 ports per module, numbered from right to the left.
The rightmost port at slot A is port 1 and the leftmost
port at slot B (if installed) is port 8.
2 external ports with compliance to USB 1.1/2.0. Plug
in a USB hard drive for voicemail backup from the
internal one
Connect to a broadband modem or a WAN router
Connect to a LAN switch
Advertisement
Table of Contents
