Table of Contents
Advertisement
Step 4: Add Device
1.
Enter a device name in the Device ID box.
2.
Select Auto Provision if you want to enable Automatic Client Configuration.
3.
Click ADD to see the newly added device in the table of the webpage, or to see the Enable
Automatic Client Configuration (ACC) page if Auto Provision is selected.
Enter settings shown in Table 3-3 ACC (Automatic Client Configuration) Settings and click ENABLE.
Note: Consult with your vendor to make sure your SIP phone support Auto Provision function.
For deleting a device, select a device ID and click DEL.
Note: Make sure there is no extension associate with the device, or it cannot be deleted.
Click Next to set a device.
Table 3-3 ACC (Automatic Client Configuration) Settings
Field
Vendor Prefix
MAC Address
Supplementary Configuration
Codec Preference
Enable Voice Activity Detection
(VAD)
DTMF mode
Setp 5: Add Extension
3.1.5.1 Add Extension of IP Phone
1.
Enter settings shown in Table 3-4.
2.
Click ADD to see the newly added extension in the table of the webpage.
Description
Ask your IP Phone vendor for the Prefix. e.g. eip7012.
MAC address of the device.
Supplementary configuration files for IP Phone. The file name
must start with "psc-".
Preference order of supported codec and packet times of the
phone.
VAD is a technique that detects absence of audio and conserves
bandwidth by preventing the transmission of "silent packets" over
the network.
Select if your IP Phone supports VAD.
Choose a DTMF mode used by the phone.
7
Advertisement
Table of Contents
