Table of Contents
Advertisement
Reachable User Groups
Associated PBX Features
Member List
Auth. Dial Passcode
Group Call
6.2 User Configuration
A user is a logical entity in IP telephony which associates extensions with a usergroup. It also
propagates its attributes such as e-mail and voicemail PIN to extensions. Usually a user refers to a real
person who has a name and e-mail; however, one can always create virtual users to associate with
public extensions. For example, extensions in reception, break room, and lab areas.
Select User Management -> User, and one can add, edit, delete or search users. Go to Service -> IP
PBX Service, and click Reload to activate changes.
6.2.1 Add a User
1.
Click the Add New tab.
2.
Enter settings shown in Table 6-2.
3.
Click Add.
19
Please refer to 7 for details.
Select a usergroup and click
this usergroup. By default, only users in the same usergroup
can reach one another.
If there is not any appropriate usergroup to select,
19
Select PBX features enabled to this usergroup.
Show the users associated with this usergroup.
Select and enter a password in number for caller to have the
same privilege as this usergroup to dial out.
A gourp call number is a virtual number that presents all
extensions belong to this group. Enter a group call number
(not an existed extension/service number). Select
extensions and click
adding all extensions, click Apply.
come back later to revise this selection, once more
usergroups have been created.
43
that is reachable from
to add into the group call. After
Advertisement
Table of Contents
