Planet DVR-460 User Manual page 66

‧ Routine / Motion
Click "Routine" tab to select the time range for continuous recording, or
"Motion" tab to select the time range within which the recording will be on when any
movement is detected.
‧ Time Table
Find the day and time you want to enable the recording. Then, click to select the time
interval(s). Each interval represents 30 minutes.
To enable the recording all the time, click "＋"; to clear the record timer setting, click "－".
Alert
In "Alert", you can set the DVR to beep for notification when there's any alert happened.
Check the buzzer option you want, and set how long the beep sound will be lasted.
Function
Ext Alert
Buzzer Enabled
Motion Buzzer / Alarm
Buzzer / Video Loss
Buzzer / Key Input Buzzer
Notified by
Duration
66
Description
Check this option to enable the external alert.
This option must be checked for "Motion Buzzer", "Alarm Buzzer"
and "Video Loss Buzzer" to take effects.
Check one of these 4 options, and you will hear the beep sound
when any movement is detected / the alarm is triggered / video loss
occurs / any DVR key is pressed.
Select the notification method when any event occurs: Email or FTP.
Set the alert and buzzers to beep for 5 / 10 / 20 / 40 seconds.
DVR-460 User Guide