Download  Print this page

Planet DVR-1671 Quick Installation Manual

4/16-ch h.264 digital video recorder
Hide thumbs

Advertisement

4/16-ch H.264 Digital Video Recorder
DVR-471 / DVR-1671
Version: 1.0
Quick Installation Guide

Advertisement

Table of Contents
loading

  Also See for Planet DVR-1671

  Related Manuals for Planet DVR-1671

  Summary of Contents for Planet DVR-1671

  • Page 1 4/16-ch H.264 Digital Video Recorder DVR-471 / DVR-1671 Version: 1.0 Quick Installation Guide...
  • Page 2: Table Of Contents

    Table of Contents 1. Overview ... 3 2. Package Contents ... 4 3. Rear Panel Description ... 5 4. HDD Installation ... 6 5. Hardware Installation ... 8...
  • Page 3: Overview

    1. Overview This quick installation guide describes the objectives, organization and basic installation of the PLANET DVR-471 / DVR-1671 surveillance system, and offers standalone system to build a distributed surveillance system, which can be monitored via network, and equipped with hard disc drive that records the video directly.
  • Page 4: Package Contents

    2. Package Contents 1 x DVR-471 / DVR-1671 ó 1 x Power adapter ó 1 x Power cord ó 1 x Quick installation guide ó 1 x User’s manual CD ó 2 x SATA cable ó 1 x SATA power cable ó...
  • Page 5: Rear Panel Description

    3. Rear Panel Description Item VIDEO IN SPOT VIDEO OUT AUDIO IN AUDIO OUT PS/2 ETHERNET SENSOR / RS-485 / RELAY OUT POWER IN POWER SWITCH Description BNC input ports for cameras BNC output port for spot monitor BNC output port for the main monitor RCA input port for an audio signal RCA output port for an audio signal Output port for the VGA monitor...
  • Page 6: Hdd Installation

    4. HDD Installation Step 1: Lock HDD holder symmetrically in the two sides of HDD with racks and screws. Make sure the position between HDD and racks. The HDD must be installed before the DVR is turned on. Note Step 2: Insert the SATA cable and power cable into SATA HDD.
  • Page 7 Step 3: Lock the HDD onto DVR machine. Step 4: Insert the SATA cables into the sockets on the main board. Make sure the HDD1, 2 cables insert into HDD1, 2 sockets. Now, the installation was finished...
  • Page 8: Hardware Installation

    5. Hardware Installation 1. Connect your cameras to the Video Inputs. 2. Connect your main monitor to “Video Output” or “VGA” connector. 3. Connect the “Ethernet” port to your switch / hub via RJ-45 cable. 4. Connect the bundled power adapter (DC 12V) to the “Power In” 5.

This manual is also suitable for:

Dvr-471