Planet DVR-460 User Manual page 34

2) BAUDRATE
Press "UP" / "DOWN" button to set the baud rate of the DVR (2400 / 9600 / 19200 /
57600).
3) HOST ID
Press "UP" / "DOWN" button to set the ID of the DVR (0 ~ 255).
4) PASSWO RD
Press "EN TER" to reset the password for accessing the DVR system (ADMIN
PASSWORD or GUEST PASSWORD). You can set the password
Note:
Users who use guest password to access the DVR will be only allowed to view the live
streaming video and sequence display, shift the channel display, and lock keys.
5) RESET DEFAULT
Press "ENTER" to reset all settings as default, and select "YES" to confirm or "NO" to
c ancel.
6) CLEAR HDD
Press "ENTER", and select "YES" to confirm to clear HDD or "NO" to cancel.
7) UPGRADE
Press "ENTER ", and select "YES" to confirm upgrade or "NO" to cancel.
Note:
1. To use this function, you need to have the upgrade file saved in a compatible USB flash drive,
a nd insert it into the USB port at the front or rear panel.
2. Do n ot disconnect the power of your DVR while the upgrade process is in progress, or the
DVR functions may not work normally or be unable to use.
8) AUTO KEYLOCK
Set the time-out in second after which the key lock function is activated (Never / 10 / 30 /
6 0).
9) LANGUAGE (Supp
Press "ENTER" to select the language of the OSD.
10) VIDEO FORMAT
Here shows the information of the DVR
11) VERSION
Here shows the firmware version information.
34
ort multi-language)
video format (NTSC / PAL).
up to 4 digits.
DVR-460 User Guide