Record Setting
Press "
" to go into the "Record Se
tting" page, and you can set the following items:
‧Record type
‧Hard disk overwriting
‧Pre- / post-alarm record time
‧Record time setting
Record path
‧
Record type
In this section, you can select which type of the recording will be enabled. There are 4
options: Manual / Schedu
le / Motion / Alarm.
Hard disk overwriting
To overwrite the
recorded data from the earliest to the latest when the hard disk is full,
check "Hard Disk Overwrite" checkbox.
Pre- / post-alarm record time
Select the pre-/post-alarm recording time from 0 sec. to 60 sec.
Record time setting
There are two ways to set the record time: Weekly and Custom.
53
4-CH MPEG-4 Digital Video Recorder