Software Installation For Mac; Usb2.0 Mode In Mac; Using Network Mode In Mac - OWC NASPerform User Manual

Software Installation for Mac

usB2.0 m
Ode In
When the enclosure is connected to the computer USB port using included USB cable,
Mac OS will recognize it automatically and mount the drive to desktop. If the hard drive
is not initialized yet, please refer to section "IDE Hard Drive Partition and Format" for
instruction.
u n m
sIng etwOrk
Note: Current NDAS driver for Mac Supports only PowerPC – based Macs. Please check avail-
ability of NDAS driver for Intel-based Mac at our website.
A) Driver Installation
1. Insert included CD.
2. Select to open the OS folder to match your operating system.
3. Run "NDAS Install.mpkg" file.
4. Follow through the installer window to complete driver installation.
5. Restart computer.
B) Drive Registration and Mount the NASPerform Drive
1. Power on and use included Ethernet cable to plug NASPerform enclosure into avail-
able Ethernet port on the Router, switch or Wireless Access Point in your Local Area
Network (LAN).
2. Open "NDAS Utility" from Go > Utilities (or Application > Utilities).
3. Click on icon on the top-left corner of the window to register a new device.
4. Enter a name for "NDAS Device Name".
m
ac
m
Ode In ac
13