Table of Contents
Advertisement
1. The device is a power-required device, it means, it will not work
till it is powered. If your networks should active all the time,
please consider using UPS (Uninterrupted Power Supply) for your
device. It will prevent you from network data loss or network
downtime.
Power
2. In some area, installing a surge suppression device may
Notice
also help to protect your Gigabit Ethernet Switch from being
damaged by unregulated surge or current to the Switch or the
power adapter.
2.2 Installing the Switch
This part describes how to install your Gigabit Ethernet Switch and make
connections to it. Please read the following topics and perform the procedures in
the order being presented.
This Gigabit Ethernet Switch does not need software configuration.
Note
2.2.1 Desktop Installation
To install the Gigabit Ethernet Switch on desktop, simply follow the next steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom of the Gigabit
Ethernet Switch.
Step 2: Place the Gigabit Ethernet Switch on desktop near an AC power source.
Step 3: Keep enough ventilation space between the Gigabit Ethernet Switch and
the surrounding objects.
When choosing a location, please keep in mind the environmental
restrictions discussed in Chapter 1, Section 1.4 Product Specifica-
tions.
Note
Step 4: Connect your Gigabit Ethernet Switch to network devices.
Figure 2-4 GSW-2401 rear panel
Advertisement
Table of Contents
