Your Ditto Max Tape Drive; Inserting And Removing Tapes - Iomega 3151100 User Manual

Your Ditto Max Tape Drive

Your Ditto Max Tape Drive Your Ditto Max Tape Drive
Your Ditto Max Tape Drive Your Ditto Max Tape Drive

Inserting and Removing Tapes

Place the tape cartridge in the OmniTray and press the Eject/Load
button to close the tray. To remove the tape cartridge from the
drive, press the Eject/Load button and remove the tape cartridge
when the tray has opened. Remove tapes when not in use.
The Ditto Max 3GB tape is the smallest of all the Ditto Max tapes.
It is important that you set the tape in the OmniTray correctly to
ensure the tape can be used by the drive. To insert correctly, place
the 3GB tape into the OmniTray as shown below, making sure that
the tape settles securely over the tabs.
Caution: Keep fingers out of tray as it closes.
Notch
Plastic Tab
47