Using Windows Nt 4.0 (Optional); Minimum System Requirements; Before Hardware Installation - Iomega 3151100 User Manual

Using Windows NT 4.0 (Optional)*

Using Windows NT 4.0 (Optional)* Using Windows NT 4.0 (Optional)*
Using Windows NT 4.0 (Optional)* Using Windows NT 4.0 (Optional)*

Minimum System Requirements

• Windows NT 4.0
• Pentium processor
• 32MB or more RAM
• A hard disk with 5MB free

Before Hardware Installation

Please carefully read the instructions outlined below BEFORE you install the
TM
Ditto Max Professional drive and the Iomega Backup 97 backup software for
Windows NT 4.0. These additional steps are necessary because Windows NT
4.0 may not recognize a plug-and-play card.
1 Before installing the card or drive, turn off the plug-and-play setting in the
BIOS. (See your computer's hardware documentation for instructions.)
2 Install the card and internal tape drive as instructed in the Installing Your
Internal Tape Drive section of this guide.
3 Turn on your computer and log on to Windows NT. (You will need
local machine administrator rights to complete these steps.)
4 When Windows NT detects new hardware, choose "Do Not Install Driver."
5 Now install Iomega Backup 97 software according to the instructions in
the next section, Software Installation.
6 Select Yes when asked whether you installed a plug and play card and
follow the on-screen instructions. (You will need your Microsoft NT
4.0 CD—quit the Auto Run application after you have inserted the
CD.) If you have an NT service pack installed, use the service pack CD.
7 Be sure to reboot your computer after installing the Iomega Backup 97
software.
8 Run The Works in Iomega Backup 97 and let it search for new hardware.
If the drive is found, run a test backup.
If the drive is not found, you may have no resources available in the system.
1 Disable at least one device. (Follow the instructions in your Windows
NT documentation for disabling unused hardware resources.)
2 Reboot your computer.
3 Run Iomega Backup 97 and let it search for new hardware.
*Iomega Backup software for Windows NT is included with the Ditto Max
Professional drive or you may purchase it separately by calling 1-800-MY-STUFF.
35