Important Compatibility Information - Iomega 3151100 User Manual

Important Compatibility information

Important Compatibility information Important Compatibility information
Important Compatibility information Important Compatibility information
Printing in Windows 95
With Windows 95, you may experience problems using the pass-through
printing feature of your Ditto drive. The cause of this problem is usually the
printer's Status Monitor in the printer manufacturer software. Until the
printer manufacturers fix this problem, disabling the printer's Status
Monitor usually resolves the issue without affecting your printer's
performance.
At this time, the problem exists with parallel port printers connected to any
type of parallel port tape drive.
For some simple solutions, locate your printer in the chart below and follow
the instructions for the specified solution.
Printers
HP Laserjet 4L, 4+, 4V, 4SI, 4P, 5P, 5M, 6P, 6M
Brother HL630
Canon BJC 610, 620, and 4000 series
Lexmark
Okidata 600e
HP DeskJet 820C series
HP LaserJet 5L
If your printer is not listed, try solution #1; your printer may have been
added to Windows 95's generic printer drivers after this guide was printed.
If solution #1 does not correct your printing problem, contact your printer
manufacturer.
Solution #1 Solution #1
Solution #1 Solution #1 Solution #1
Use Windows 95 Generic Printer Drivers
1 Click the Start button on the taskbar.
2 Select Settings then Printers. (Note the name of your current
printer:__________________________________________)
3 Double-click on the Add Printer icon.
4 Click Next.
5 Choose Local Printer and click Next.
6 Select your printer manufacturer and type of printer and click Next.
(Do not choose Have Disk.)
Solutions
1 2 3
x
x
x
x
x
x
x
31