Table of Contents
Advertisement
Starting the programme
1. Press the START/PAUSE button.
The programme is started or it starts after the time delay set has
elapsed.
3
If after pressing the START/PAUSE button the display shows "PLEASE
CLOSE THE DOOR", the door has not been shut properly. Push the door
closed firmly and press the START/PAUSE button again.
Programme progress
The display indicates the
stage of the programme that
is currently being performed
as well as the time of the
end of the programme.
3
During the drying cycle the
time of the end of the pro-
gramme may change as the
programme adjusts itself to different conditions (e.g. type and volume
of laundry).
Changing a programme
To change a programme which has been selected by mistake once the
programme has started, first turn the programme knob to OFF (AUS)
and then reset the programme.
3
The programme can no longer be changed directly once the programme
has started. If you nevertheless attempt to change the programme with
the OPTION button or the programme knob, the message SELECTION
ERROR will flash in the display. The drying programme is not however
affected by this (washing protection).
Putting in extra items or taking items out before end of
programme
1. Open door.
1
Warning! Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close door securely.
4. Press the START/PAUSE button to continue the drying cycle.
EXTRA DRY
Drying
dýaýa
aýaýaýaýaýaýaýaýa
TÜR
U/MIN
PORTE
T/MIN.
12.45
15.01
OPTION
OK
OPTIONS
OK
TEMPS
ZEIT
17
Advertisement
Table of Contents
