Long Anticrease; Starting The Programme; Programme Progress; Changing A Programme - AEG Electrolux LAVATHERM 58800 User Information

Long Anticrease

1. Press the TIME button re-
peatedly until the
ANTICREASE symbol flashes.
2. Press the OK button. A 60
minute anti-crease phase is
set. The display changes to
the initial display. It now
shows the
TICREASE symbol.

Starting the programme

1. Press the START/PAUSE button.
The programme is started or it starts after the time delay set has
elapsed.
3
If after pressing the START/PAUSE button the display shows "PLEASE
CLOSE THE DOOR", the door has not been shut properly. Push the door
closed firmly and press the START/PAUSE button again.

Programme progress

The display indicates the
stage of the programme that
is currently being performed
as well as the time of the
end of the programme.
3
During the drying cycle the
time of the end of the pro-
gramme may change as the
programme adjusts itself to different conditions (e.g. type and volume
of laundry).

Changing a programme

To change a programme which has been selected by mistake once the
programme has started, first turn the programme knob to OFF and then
reset the programme.
3
The programme can no longer be changed directly once the programme
has started. If you nevertheless attempt to change the programme with
the OPTIONS button or the programme knob, the message SELECTION
ERROR will flash in the display. The drying programme is not however
affected by this (washing protection).
18
LONG
LONG AN-
EXTRA DRY
Long Anticrease
aýaýa aýaýaýaýaýaýaýTýk
DOOR RPM OPTIONS
EXTRA DRY
Drying
dýaýa aýaýaýaýaýaýaýaýa
DOOR RPM OPTIONS
12.45
15.01
OK TIME
12.45
15.01
OK TIME