Table of Contents
Advertisement
Drying
Switching machine on / switching light on
Turn the programme selector to any programme or turn it to LIGHT (BE-
LEUCHTUNG). The machine has been switched on. When the loading
door is opened, the drum is illuminated.
Opening loading door / filling laundry
1. Open loading door:
– Either use force to push against the loading door (push point
– or if the machine is switched on: Press the DOOR (TÜR) button.
2. Load your laundry (do not force it in).
1
Caution! Do not jam laundry in between the loading door and rubber
seal.
3. Close loading door securely. Lock must audibly lock.
Selecting the programme
Use the programme selector
to set the programme you re-
quire.
The estimated time of the
end of the programme ap-
pears in the multi-display.
Setting the pre-drainage spin speed
If the washing in the wash-
ing machine was initially
drained prior to the drying
cycle, the dryer can be set
according to the spin speed
of the initial drainage proce-
dure. The higher the spin
speed was, the shorter the
programme length for the drying cycle.
1. Press the RPM (U/MIN) button a number of times until the desired spin
speed of the initial drainage is displayed.
EXTRA DRY
Cycle end at
dýaýa 1200 aýaýaýaýaýaýaýaýa
TÜR
U/MIN
PORTE
T/MIN.
OPTIONS
12.45
14.40
OPTION
OK
ZEIT
OK
TEMPS
)
13
Advertisement
Table of Contents
