Manual Activation Laser Timeout - Button Settings - Honeywell VOYAGER 1200G User Manual

good read. If you scan Do Not End Manual Activation After Good Read,
the laser remains on after a good read, but the button must be pressed to
scan the next bar code. Default = End Manual Activation After Good Read.
Do Not End Manual Activation
After Good Read In-Stand
Do Not End Manual Activation
After Good Read Out-of-Stand

Manual Activation Laser Timeout - Button Settings

You can set a timeout for the length of time the laser remains on and
attempting to decode bar codes when the button is held down, and after it
is released. Set the length (in milliseconds) for a timeout by scanning one
of the bar codes below, then setting the timeout (from 1-65535 millisec-
onds) by scanning digits from the
Save. Default = Button Hold In-Stand 5000 ms, Button Hold Out-of-Stand
30000 ms, Button Release In or Out-of-Stand 0.
Laser Timeout - Button Hold
In-Stand
Laser Timeout - Button Hold
Out-of-Stand
3 - 10
* End Manual Activation After
Good Read In-Stand
* End Manual Activation After
Good Read Out-of-Stand
Programming Chart, then scanning
Laser Timeout - Button
Release In-Stand
Laser Timeout - Button
Release Out-of-Stand