Honeywell VOYAGER 1200G User Manual page 84

you are programming. (See
5-10 for further information.)
Step 3. Terminal Type
Refer to
number for your PC. Scan three numeric bar codes on the
Programming Chart
must enter 3 digits). For example, scan 0 0 3 for an AT wedge.
Note: The wildcard for all terminal types is 099.
Step 4. Code I.D.
In the Symbology Chart,
which you want to apply the data format. Locate the Hex value for that
symbology and scan the 2 digit hex value from the
inside the back cover of this manual.
Step 5. Length
Specify what length (up to 9999 characters) of data will be acceptable
for this symbology. Scan the four digit data length from the
Programming Chart
characters is entered as 0050. 9999 is a universal number, indicating
all lengths.)
Step 6. Editor Commands
Refer to (page 5-4). Scan the symbols that represent the command you
want to enter. 94 alphanumeric characters may be entered for each
symbology data format.
Step 7. Scan Save to save your data format, or Discard to exit without saving
your changes.
5 - 2
Terminal ID Table
to program the scanner for your terminal ID (you
beginning on page A-1, find the symbology to
inside the back cover of this manual. (Note: 50
Save
Primary/Alternate Data Formats
(page 5-4) and locate the Terminal ID
on page
Programming Chart
Enter Data Format
Discard