Loop Protection Status - Planet XGSW-28040 User Manual

The page includes the following fields:
General Settings
Object

Enable Loop
Protection
 Transmission Time

Shutdown Time
Port Configuration
Object

Port
 Enable
 Action

Tx Mode
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.16.2 Loop Protection Status

This page displays the loop protection port status the ports of the switch, screen in
Description
Controls whether loop protections is enabled (as a whole).
The interval between each loop protection PDU sent on each port. valid values
are 1 to 10 seconds.
The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action shuts down the port). Valid values are 0 to
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).
Description
The switch port number of the port.
Controls whether loop protection is enabled on this switch port.
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Figure 4-16-2 Loop protection status screenshot
314
User's Manual of XGSW-28040
Figure 4-16-2 appears.