Planet XGSW-28040 User Manual page 34

Secure the brackets tightly.
Step3:
Follow the same steps to attach the second bracket to the opposite side.
Step4:
After the brackets are attached to the Managed Switch, use suitable screws to securely attach the brackets to the
Step5:
as shown in Figure
Proceeds with the steps 4 and steps 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply
Step6:
Figure 2-6 Attach brackets to the Managed Switch.
You must use the screws supplied with the mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate the warranty.
2-7.
Figure 2-7 Mounting XGSW-28040 in a Rack
34
User's Manual of XGSW-28040
rack,