Stp Port Configuration; Stp Port Mode - Planet XGSW-28040 User Manual

Example:
Add MST1 in vlan1.
XGSW-28040:/>stp msti add 1 1

STP Port Configuration

Description:
Show STP Port configuration.
Syntax:
STP Port Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
Example:
Show STP status of Port1
XGSW-28040:/>stp port configuration 1
Port Mode
---- -------- ------------------ ------------------ -----------
1 Disabled Disabled Enabled

STP Port Mode

Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
: Enable MSTP protocol
Enable
: Disable MSTP protocol
Disable
Default:
AdminEdge AutoEdge restrRole restrTcn Point2point
Disabled Disabled Auto
460
User's Manual of XGSW-28040