If port DSCP classification is 'selected', DSCP will be classified based on QoS class and DP level only for DSCP value
with classification mode 'enabled'. DSCP may be translated DSCP if translation is enabled for the port.
Syntax:
QoS DSCP Classification Mode [<dscp_list>] [enable|disable]
Parameters:
<dscp_list>: DSCP (0-63) list or 'all'
: Enable DSCP ingress classification
enable
: Disable DSCP ingress classification
disable
(default: Show DSCP classification mode)
Default Setting:
disable
QoS DSCP EgressRemap
Description:
Set or show DSCP egress remap table. This table is used if the port egress remarking mode is 'remap' and the purpose is
to map the classified DSCP to a new DSCP value.
Syntax:
QoS DSCP EgressRemap [<dscp_list>] [<dscp>]
Parameters:
<dscp_list>: DSCP (0-63) list or 'all'
: Egress remapped DSCP: 0-63, BE, CS1-CS7, EF or AF11-AF43
<dscp>
QoS Port Storm Unicast
Description:
Set or show the port storm rate limiter for unicast frames.
Syntax:
QoS Port Storm Unicast [<port_list>] [enable|disable] [<rate>] [kbps|fps]
Parameters:
<port_list>: Port list or 'all', default: All ports
499
User's Manual of XGSW-28040