Radius Details - Planet XGSW-28040 User Manual
24-port gigabit with 4 shared sfp 4-port 10g sfp+ managed switch
Hide thumbs
Also See for XGSW-28040:
- Quick installation manual (12 pages) ,
- Command manual (433 pages)
Table of Contents
Advertisement
RADIUS Accounting Servers
Object
#
IP Address
State
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
:
Click to refresh the page immediately.
4.11.8 RADIUS Details
This page provides detailed statistics for a particular RADIUS server. The RADIUS Authentication/Accounting for Server
Overview screen in
Figure 4-11-9
before this occurs is displayed in parentheses. This state is only reachable when
more than one server is enabled.
Description
The RADIUS server number. Click to navigate to detailed statistics for this server.
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of
this server.
The current state of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and
running.
Ready: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number of
seconds left before this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
appears.
250
User's Manual of XGSW-28040
Advertisement
Table of Contents
