Object
Port
Path Cost
Priority
Buttons
: Click to set MSTx configuration
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.7.8 Port Status
This page displays the STP CIST port status for port physical ports in the currently selected switch.
The STP Port Status screen in
Description
The switch port number of the corresponding STP CIST (and MSTI) port.
Controls the path cost incurred by the port. The Auto setting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The path
cost is used when establishing the active topology of the network. Lower path
cost ports are chosen as forwarding ports in favor of higher path cost ports. Valid
values are in the range 1 to 200000000.
Controls the port priority. This can be used to control priority of ports having
identical port cost.
Figure 4-7-14
appears.
151
User's Manual of XGSW-28040