Installing The Switch - Planet GSD Series User Manual

Power Notice:
1. The device is a power-required device, it means, it will not work till it is pow-
ered. If your networks should active all the time, please consider using UPS (Un-
interrupted Power Supply) for your device. It will prevent you from network data
loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect
your Switch from being damaged by unregulated surge or current to the Switch
or the power adapter.

2.2 Installing the Switch

This part describes how to install your Gigabit Ethernet Switch and make
connections to it. Please read the following topics and perform the procedures in
the order being presented.
Note: This Switch does not need software configuration.
Figure 2-7 GSD-803 rear panel
Figure 2-8 GSD-804 rear panel
11