Before You Begin - Pro-Form 6.0 Rt Treadmill Manual
English manual
Hide thumbs
Also See for 6.0 Rt Treadmill:
- User manual (28 pages) ,
- User manual (28 pages) ,
- User manual (28 pages)
Table of Contents
Advertisement
BEFORE YOU BEGIN
Thank you for selecting the new PROFORM
treadmill. The 6.0 RT treadmill provides an impressive
selection of features designed to make your workouts
at home more effective and enjoyable.
For your benefit, read this manual carefully before
you use the treadmill. If you have questions after
reading this manual, please see the front cover of this
Length: 5 ft. 6 in. (168 cm)
Width:
2 ft. 8 in. (81 cm)
Handrail
Storage Latch
Walking Belt
Foot Rail
Idler Roller
Adjustment Screws
®
6.0 RT
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
6
Accessory Tray
Console
Heart Rate Monitor
Key/Clip
Motor Hood
Power Switch
Power Cord
Wheel
Platform Cushion
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 6.0 Rt Treadmill and is the answer not in the manual?
Questions and answers
the track is stuck in an incline position and the display continues to move through the various speed settings but none of the buttons can be activated. to lower the tack or start and stop any function. while in a programed mode I increased and lowered thespeed and now nothing works
To fix a stuck incline on a Pro-Form 6.0 RT Treadmill when the display is unresponsive, follow these steps:
1. Hold down the Stop button and the Speed increase button.
2. Insert the key into the console.
3. Release the Stop button and the Speed increase button.
4. Press the Stop button again.
5. Press the Incline increase or decrease button.
The treadmill will automatically rise to the maximum incline level and then return to the minimum level to recalibrate the incline system. If the incline does not begin calibrating, repeat steps 4 and 5. Once the calibration is complete, remove the key.
This answer is automatically generated
Does Proform 6.0 RT model require user to lubricate the motor belt?