Disassembly Procedures
!
!
To avoid risk of personal injury or death; shut off gas
supply to unit before servicing Burner Assembly.
Burner Removal
1. Disconnect power supply to unit.
2. Shut off gas supply.
3. Disconnect gas line.
4. Remove two screws securing burner to bracket.
28
WARNING
WARNING
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
NOTE: The Igniter Bar is fragile. Be careful not to
5. Remove the two screws attaching the housing to the
burner bracket. The screws are recessed from view.
6. Slide Burner Assembly from dryer.
16025911 Rev. 0
damage Igniter when removing Burner
Assembly.
©2005 Maytag Services