Moisture Sensor Removal; Belt Removal - Maytag MDE9700A Series Service Manual

Disassembly Procedures
!
9. Lift Bulkhead from Cabinet and remove.

Moisture Sensor Removal

1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Disconnect Moisture Sensor wire harness.
22
WARNING
16025911 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
6. Remove sensor attachment screw.

Belt Removal

1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Remove belt from Idler Pulley
©2005 Maytag Services