Using Your Dcp With A Macintosh ®; Setting Up Your Usb-Equipped Apple ® Macintosh ® - Brother DCP-8020 User Manual

11
mb
Using your DCP with a
Macintosh
Setting up your USB-equipped Apple
Macintosh
■
Before you can connect the DCP to your Macintosh
must buy a USB cable that is not longer than 1.8 metres.
Do not connect the DCP to a USB port on a key board or
a non-powered USB hub.
■
Some descriptions in this chapter are based on the
DCP-8025D. These descriptions also apply to the
DCP-8020.
The features supported by the DCP will depend on the operating
system you are using. The chart below shows which features are
supported.
Feature
Printing
Scanning (TWAIN)
®
*1 For Mac OS
or greater. (For the latest information for Mac OS
http://solutions.brother.com)
®
®
Mac OS
8.6
Yes
Yes
X 10.2 users, please upgrade to Mac OS
USING YOUR DCP WITH A MACINTOSH
®
9.X 10.1
Yes Yes
Yes No
®
X, please visit at:
®
®
, you
®
Mac OS X
10.2.1 or
* 1
greater
Yes
Yes
®
X 10.2.1
®
11 - 1