Scan To Ocr (Word Processor); To Access Scan To Ocr Configurations Screen; Scanner Settings - Brother DCP-8020 User Manual
Hide thumbs
Also See for DCP-8020:
- User manual (282 pages) ,
- Quick setup manual (54 pages) ,
- Service manual (353 pages)
Table of Contents
Advertisement
Scan to OCR (Word Processor)
To access Scan to OCR Configurations screen
1
Place the document face up in the ADF. The Brother Control
Center screen will pop up.
2
Right-click the word processor application button and click on
Configuration. Click the Modify Settings button to view the
configuration screen of the Control Center.
3
To save your settings, click OK.
—OR—
To go back to the default settings, click the Restore Defaults
button.
Scanner settings
From the pull-down list, select the scanning mode that is appropriate
for the type of file: Faxing, Filing and Copying; Text for OCR;
Photos; Photos (High Quality); Photos (Quick Scan); Custom;
Draft Copy or Fine Copy.
To change any of the settings for this mode, click Modify Settings.
Faxing is only possible if you have a fax modem attached to your
computer.
USING THE BROTHER CONTROL CENTER 9 - 12
Advertisement
Table of Contents
