Scan To File - Brother DCP-8020 User Manual

Scan to File

When you select Scan to File you can scan a black and white or color
document and send it directly to a PC you designate on your
network. The file will be saved in the folder and file format that you
have configured in the Brother SmartUI on the designated PC. You
can change the
®
(For Windows
®
(For Windows
button configuration on page 10-5 to 10-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Scan
Press
3
Press
to File .
Set
Press .
4
Press
destination you want to send.
Set
Press .
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Set
Press .
The DCP will start the scanning process.
Max. 25 clients can be connected to one DCP on a Network. For
example, if 30 clients try to connect at a time, 5 clients will not
be shown on the LCD.
Scan
configuration.
98/Me/2000: See Scan to File on page 9-8 to 9-9.)
XP: See Hardware Section: Changing the Scan to
.
or to select Scan
or to select a
▲
Scan to E-Mail
Scan to Image
Scan to OCR
▼
Scan to File
▲▼
Select & Set
NETWORK SCANNING 12 - 9