Custom: User-Defined Buttons; Customizing A User-Defined Button; Select The Scan Action - Brother DCP-8020 User Manual

Custom: User-defined buttons

There are up to three Custom buttons on the Brother SmartUI
Control Center. (NOTE: The number of Custom buttons depends on
which Brother model you purchased.) You can set your own
preferences and configuration to fit your required application.
To configure a Custom Button right click on the button and then click
Configuration. The configuration window will appear. You have four
function choices Application, File, OCR and E-mail.
Application: This setting will link the Control Panel button to any
®
button which appears on the PaperPort Send to Bar. Please see the
® ®
PaperPort help file for more information regarding PaperPort
compatible applications.
File: This setting allows you to save a scanned image to any
directory on local or network hard disk. You can also select the file
format to be used.
OCR: Scanned documents will be converted to editable text files. If
you have a third party OCR software package installed on your PC
®
you can select it. The default OCR software is TextBridge which is
®
built into PaperPort 8.0 SE. You can also select the destination
word processor and file format for the editable text.
E-mail: Scanned images will be attached to an E-mail message.
You can choose which E-mail package to use if you have more than
one installed on your system. You can also select the file type for the
attachment.

Customizing a user-defined button

To configure a Custom button right-click on the button and then click
Configuration. Please follow the following guide lines for Custom
Button configuration.

1. Select the Scan Action

Select the type of scan by clicking the appropriate button.
®
USING THE WINDOWS -BASED BROTHER SMARTUI CONTROL CENTER 10 - 27