Headlamp High/Low-Beam Changer - Pontiac None Aztek Owner's Manual

If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when you
signal a turn, check for burned-out bulbs and check the
fuse. See Fuses and Circuit Breakers on page 5-113.
If you have a trailer towing option with added wiring for
the trailer lamps, the signal indicator will flash at a
normal rate even if a turn signal bulb is burned
out. Check the front and rear turn signal lamps regularly
to make sure they are working.
Turn Signal On Chime
If either turn signal is left on for more than 3/4 mile
(1.2 km), a chime will sound to let you know to turn
it off.
To turn off the chime, turn off the signal.

Headlamp High/Low-Beam Changer

To change the headlamps from low to high, push the
turn signal lever away from you and release it. To
change the headlamps from high to low, pull the lever
toward you.
Flash-to-Pass
When the headlamps are off, pull the lever toward you
to momentarily switch on the high beams. This will
signal that you are going to pass. When you release the
lever, they will turn off.
When the high beams are
on, this light on the
instrument panel cluster
and the HUD display,
will also be on.
3-9