Pontiac None Aztek Owner's Manual page 95

General motors 2004 pontiac aztek owner manual
Table of Contents

Advertisement

If the engine still does not start, and the key appears to
be undamaged, try another ignition key. At this time,
you may also want to check the fuse. See Fuses
and Circuit Breakers on page 5-113. If the engine still
does not start with the other key, your vehicle needs
service. If your vehicle does start, the first key may be
faulty. See your dealer who can service the
®
PASS-Key
III to have a new key made.
It is possible for the PASS-Key
transponder value of a new or replacement key. Up to
10 total keys may be programmed for the vehicle. This
procedure is for learning additional keys only. If all the
currently programmed keys are lost or do not operate,
you must see your dealer or a locksmith who can service
®
PASS-Key
III to have keys made and programmed to
the system.
See your dealer who can service PASS-Key
new key blank that is a cut exactly as the ignition key
that operates the system.
Canadian Owners: If you lose or damage your keys,
only a GM dealer can service PASS-Key
have new keys made. To program additional keys you
will need two current driver's keys (black in color).
You must add a step to the following procedure. After
Step 3, repeat Steps 1 through 3 with the second current
driver's key. Then continue with Step 4.
®
III decoder to learn the
®
III to get a
®
III to
To program the new PK3
1. Verify the new key has PK3
2. Insert the current driver's key in the ignition and
start the engine. If the engine will not start, see
your dealer for service.
3. After the engine has started, turn the key to OFF,
and remove the key.
4. Insert the key to be programmed and turn it to ON
within 10 seconds of removing the previous key.
5. The SECURITY message will turn off once the key
has been programmed. It may not be apparent that
the SECURITY message went on due to how
quickly the key is programmed.
6. Repeat Steps 1 through 4 if additional keys are to
be programmed.
If you are ever driving and the SECURITY message
comes on and stays on, you will be able to restart your
engine if you turn it off. Your PASS-Key
however, is not working properly and must be serviced
by your dealer. Your vehicle is not protected by the
®
PASS-Key
III system at this time.
If you lose or damage a PASS-Key
dealer who can service PASS-Key
new key made.
®
key do the following:
®
stamped on it.
®
III system,
®
III key, see your
®
III to have a
2-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aztek 2004

Table of Contents