Headlamps - Pontiac None Aztek Owner's Manual

Headlamps

1. Open the hood.
3. Unsnap the headlamp assembly by pulling it
forward, away from the vehicle.
4. Disconnect the electrical connector by pulling back
on the locking tab, located on the electrical
connector, to separate the two connectors.
2. Push in on the
headlamp and lift up
the headlamp retaining
clip partway, but do
not remove.
6. Turn the bulb socket one-quarter of a turn
clockwise.
7. Pull the bulb assembly out from the lamp housing.
5. Remove the bulb
access cover.
5-51