Delayed Locking; Remote Door Unlock - Pontiac None Aztek Owner's Manual

General motors 2004 pontiac aztek owner manual
Table of Contents

Advertisement

Delayed Locking

The delayed locking feature can be programmed to one
of the following modes:
ON: Lock your vehicle using the power door lock switch
or the remote keyless transmitter while any door is
opened, you will hear three chimes and the doors will
not lock. Five seconds after the last door is closed,
all doors will lock.
Once delayed locking is programmed to ON, you can do
the following:
Cancel the delayed locking by pressing unlock
using the power door lock switch, or by fully
inserting the key in the ignition.
Override the delayed locking feature by pressing
lock immediately using the power door lock
switch.
Let the delayed locking feature complete the locking
of the vehicle.
OFF: The doors will always lock immediately when you
lock the doors using the power door lock switch or
press LOCK on the remote keyless entry transmitter.
Your vehicle was originally programmed to ON. The
mode may have been changed since then. To determine
the current mode, or to change the mode, do the
following:
1. Follow the instructions for "Entering Programming
Mode" listed previously.
2. Press the MODE button until DELAYED LOCKING
appears on the DIC.
3. Press the SET button until the arrow is before ON
or OFF.
The mode you selected is now set. You can either exit
programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Remote Door Unlock

The remote door unlock feature can be programmed to
one of the following modes:
DRIVER/ALL: With the first press of UNLOCK on the
remote keyless entry transmitter, the driver's door
will unlock, and with the second press of UNLOCK,
within five seconds of the first press, all passenger's
doors will unlock.
ALL: All doors will unlock with every press of UNLOCK
on the remote entry transmitter.
3-61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aztek 2004

Table of Contents