Operating Procedure Explanation; Switching Machine On; Pre-Cooling Button - Hommy Soft Ice Cream Machine User Manual

H. Right hopper temperature indicator.
I. Power switch indicator: becomes blue when machine is switched on, default colour is red.
J. Power source button/function programming button.
K. Pre-cooling function button. This is also used as programming function navigation button (is
used to choose between electric current value setting, ice cream hardness setting and
pre-cooling temperature setting).
L. Wash function start/stop button. This is also used as the decrease function during programming
procedure.
M. Ice cream production start/stop button. This is also used as increase function during
programming procedure

7.3) Operating Procedure Explanation

7.3.1) Switching machine on

When the machine is connected to a power supply，the power indicator will show a red light
When the power button (J) is pressed, the indicator will become blue
stand-by mode and ready for operation. Alternatively, if the power button is pressed for three seconds
whilst in connected mode (red only

7.3.2) Pre-cooling button

a. When the machine is on (button J has a blue backlight
and the pre-cooling indicator logo
operational. Pressing the button once more will stop the pre-cooling system.
b. Should the user wish to preserve the freshness of ice cream mixture in the machine during a
period in which the machine is idle, he may activate this function by pressing the pre-cooling
button (K) for 3 seconds. This is done when the machine is in stand-by mode
C and E
hopper mixer will commence working simultaneously. After 10 seconds, the main compressor
and main motor will engage for 5 minutes or until the ice cream in the cylinders has attained
normal hardness, whichever is sooner. Thereafter the cylinder freshness function will operate
25,40
), then the machine will enter programming mode.
will light up in blue and the pre-cooling system becomes
will be illuminated with a blue backlight. The pre-cooling compressor and
and the machine will be in
), press the pre-cooling button (K),
. The indicators
.