Cleaning After Production: Wash Cycle - Hommy Soft Ice Cream Machine User Manual

6.3) Cleaning after production: Wash cycle

a. Place machine in standby mode. Pour clean water into hopper and then press wash button
Allow the machine to work for 2 minutes before switching off. Drain the water through the draw
valves. Repeat a few times for best results.
b. Before removing face block for cleaning, repeat the procedure a few times.
23,40
a：Inner expansion tube; b：Outer expansion tube; c：
washers
Expansion tube assembly: insert inner tube (a) into
outer tube (b), replace O rings (c) on grooves in outer
tube (b)
After cleaning hopper and expansion tubes, replace
expansion tube. The orifice dimension in expansion
tube may be increased or decreased. When decreased,
this may allow for more air in ice cream mixture.
.