AEG BE7614000 User Manual page 18

18
Using the accessories
2. Put the point of the core temperature
sensor in the centre of the meat.
3. Put the plug of the core temperature sen-
sor in the socket at the side wall of the
appliance.
The display shows a flashing symbol
and the default set core temperature. The
temperature is 60 °C during the first use,
and the last set value during each subse-
quent use.
4. Touch
ture.
5. Touch
You can set the core temperature only when the symbol
static symbol
value.
6. Set the oven function and, if necessary, the oven temperature.
The display shows the current core temperature and
tween the set oven temperature and the current oven temperature).
The core temperature sensor must stay in the meat and in the socket during the cooking.
While the appliance calculates the approximate duration time, the value of the Count Up
Timer function shows in the Timer/Residual heat display. When the first calculation ends,
the Timer/Residual heat display shows " - ", and then the approximate duration of the cook-
ing.
The appliance continues to calculate the duration during the cooking. The display updates
at intervals with the new duration value.
7. When the meat is at the set core temperature, the core temperature and
appliance deactivates. An acoustic signal sounds for two minutes.
Touch on/off sensor field to deactivate the acoustic signal.
WARNING!
Be careful when you remove the core temperature sensor. The core temperature sensor and
the appliance are hot. There is a risk of burns.
8. Remove the core temperature sensor from the socket and remove the meat from the
appliance.
When you put the core temperature sensor in the socket, you cancel the settings for the
clock functions.
or to set the core tempera-
or the settings save automatically after 5 seconds.
before you set the core temperature, use
flashes. If the display shows a
and or to set a new
(which shows the relation be-
flash. The