Clock Functions - AEG BE7614000 User Manual

14

Clock functions

CLOCK FUNCTIONS
SYMBOL
Count Up Timer
Use the Count Up Timer to monitor how long the appliance operates. It is on immediately
when the appliance starts to heat.
Reset the Count Up Timer: touch
until the display shows "00:00" and the Count Up Timer starts to count up again.
You can not use Count Up Timer when Duration or End is set.
Setting the DURATION
1. Activate the appliance and set an oven function and temperature.
2. Touch
play shows
flashes in the display.
3. Use
TION.
4. Touch
5. Use
If you touch
the END function.
6. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
Touch any sensor field or open the oven door to stop an acoustic signal.
7. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven function and temperature.
2. Touch
FUNCTION
COUNT UP TIMER
TIME OF DAY
DURATION
END
SET+GO
again and again until the dis-
.
or to set minutes for DURA-
to confirm
or to set hours for DURATION. After 5 seconds the appliance starts.
or during setting hours for DURATION, the appliance goes to setting of
again and again until the display shows
To set count up. It shows how long the appliance operates.
This function has no effect on the operation of the appliance.
To examine the time of day. For changing the time of day re-
fer to 'Setting the time of day'.
To set how long the appliance operates.
To set when the appliance deactivates. You can use Duration
and End at the same time (Time delay), if the appliance is to
be activate and deactivate automatically later.
To start the appliance with necessary settings with only one
touch of the sensor field, any time later.
again and again until
DESCRIPTION
flashes in the display. Touch
.