Changing The Oven Temperature; Fast Heat Up Function; Error Code - AEG BE7614000 User Manual

Changing the oven temperature

Touch /
When the appliance is at the set temperature, an acoustic signal operates three times and
the Heat up indicator goes off.
Examining the oven temperature
You can examine the temperature in the appliance when the function or programme oper-
ates.
1. Touch
The Temperature/Time display shows the temperature in the appliance.
If you want to change the oven temperature, touch
2. Touch
after five seconds.

Fast heat up function

The fast heat up function decreases the heat up time.
Do not put food in the oven when the fast heat up function operates.
Activating the fast heat up function : Touch and hold
If you activate the fast heat up function, the bars on the display
show that the function operates.
The fast heat up does not start with automatic programmes.

Error code

If some parameters are not correct, the control unit stops the functions which operate and
the display shows the related error code. Refer to "What to do if" chapter.
In case of a power cut, most of the settings are cancelled. Reset the settings when the pow-
er supply is restored.
Energy saving
The appliance has same features that help you save energy during everyday cooking:
• Residual heat:
– the oven function or programme operates: the heating elements are deactivated 10%
time earlier (the lamp and fan continue to operate). The condition: the cooking time is
longer then 30 minutes or you use the clock functions (Duration, End, Time delay).
– the oven is off: you can use the heat to keep the food warm. The indication: the clock/
Residual heat display shows the remaining temperature, the bars show the decreasing
temperature.
• Oven lamp off - touch
• Display off - if necessary, deactivate the appliance. Touch
until the display goes out (or on).
to change the temperature in steps of 5 °C.
.
to go back to the set temperature or the display will show it automatically
to deactivate the oven lamp during cooking;
Daily use
one more time and use
for more then three seconds.
flash one by one to
and at the same time
13
or .