Installation - Electrolux 61402 G Instruction Booklet

Installation

IMPORTANT
This hob must be installed by a competent person to the relevant Gas Standards.
Any gas installation must be carried out by a registered competent person.
Please, ensure that, once the hob is
installed, it is easily accessible for the
engineer in the event of a breakdown.
The manufacturer will not accept
liability, should the above
instructions or any of the other
safety instructions incorporated in
this instruction booklet be ignored.
On the end of the shaft, which includes
the G 1/2" threaded elbow, adjustment
is fixed so that the washer is fitted
between the components as shown in
the diagram. Screw the parts together
without using excessive force.
A) End of shaft with nut
B) Washer
C) Elbow
13