Installation - Electrolux EGU6648 User Manual

12 www.electrolux.com
Problem
The flame ring is uneven.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
A
MOD.
PROD.NO.
SER.NO
DATA
A. Stick it on Guarantee Card and send
this part (if applicable).
B. Stick it on Guarantee Card and keep
this part (if applicable).

8. INSTALLATION

WARNING!
Refer to Safety chapters.
8.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Possible cause
Burner crown is blocked
with food residues.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
Remedy
Make sure that the injector
is not blocked and the
burner crown is clean.
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
7.3 Labels supplied with the
accessories bag
Stick the adhesive labels as indicated
below:
C
MOD.
PROD.NO.
SER.NO.
0049
C. Stick it on instruction booklet.
Model .......................................
PNC .........................................
Serial number ...........................
8.2 Important safety
requirements
This hob must be installed in accordance
with the Gas Safety (Installation and
TYPE
IP20