Download Print this page

Fitting The Hob Into The Worktop - Electrolux 61402 G Instruction Booklet

Hide thumbs


Fitting the Hob into the Worktop

Before fitting the hob into the cut out, a sealing gasket supplied with the hob
must be fitted to the edge of the cut out. It is essential that no gaps are left in
this seal in order to prevent spillage near
the hob seeping into the cabinet below.
1) place the sealing gasket all around the
edge of the cut out.
2) Place the hob in the cut out, taking care
that it is centred.
3) Fix the hob with the relevant fixing
clamps and screws, as shown in the
4) When the screws have been tightened,
the excess seal can be removed.
The edge of the hob forms a double seal which
prevents the ingress of liquids.



This manual is also suitable for:

61502 g