BT QUARTET 2015 User Manual page 49

To wall-mount the handset charger
Using a pencil, mark two holes on the wall
1
48mm apart in the position you want to
mount your charger.
Drill two holes with a drill bit suitable for the
2
screws and wall-plugs supplied (if required).
Drive the screws into the wall, leaving about
3
9mm free on which to hang the charger.
Remove the back panel of your handset
4
charger as shown.
If you wish, you can rotate the back panel
5
round and attach it to the bottom of the
charger.
Press the power cord into its guide groove
6
before you hook the unit on the screws.
Hook the holes on the back of the charger
7
over the screws heads in the wall.
Power cable
47