Using The Directory - BT QUARTET 2015 User Manual

Using the Directory

Your Quartet 2015 can hold up to 20 names and
numbers in its directory which will be stored in
alphabetical order.
You can add names to the directory and edit or
delete them as required.
You can also set up calls from entries in the
directory.
To store an entr y in the Director y
Press buttons in order shown
Press the
The display shows EMPTY or your first
directory name.
Select
NEW
NEW
Key the first letter of the name you wish
KEYPAD
to enter. (For instance, to display the
letter C, press the
appears on the display.)
You will now see the letter just entered,
and the cursor will start flashing under
the next letter space after a few seconds.
If you want to enter 'C' followed by another 'C'
wait for a few seconds for the cursor to
automatically move onto the next space before
entering the second 'C'.
16
button.
DIRECTORY
. Display shows ENTER NAME.
button until C
2
NOTE
Finish entering the letters of the name,
> using the > symbol to insert a space
between the first and last name.
< To delete a letter, use the
SAVE Press . The display shows ENTER
SAVE
NUMBER.
Enter the number in the same way as
you entered the letters. If there are more
than 12, they will be scrolled along,
allowing the last 12 digits to be shown.
Insert a space if you wish (this is
ignored during dialling).
To insert a pause in the string of digits
(for instance for switchboard access),
press the
REDIAL
Redial
is shown as P.
Press . Display shows UPDATING
SAVE
SAVE
DIRECTORY followed by SAVED.
Display confirms name and number
together for up to 15 seconds, then
returns to standby.
Press and hold
BACK
BACK
DIRECTORY FULL
If you try to store a new entry and you see the
message DIRECTORY FULL, you will need to
delete an entry before you can store any others.
See'to delete an entry in the directory' page 18.
< symbol.
button. The pause
to return to standby.